•
If the attachment is installed, load the
machine with the front up the ramp.
•
If the attachment is not installed, load the
machine with the rear up the ramp
31).
Figure 31
1. Machine with
attachment—load the
machine with the front up
the ramp.
6.
Shut off the engine, remove the key, and engage
the parking brake.
7.
Tie down the machine near the front caster
wheels and the rear bumper with straps, chains,
cable, or ropes
(Figure
regulations for tie-down requirements.
Figure 32
1. Tie-down loops
(Figure
g309366
2. Machine with mower only
or no attachment—load
the machine with the rear
up the ramp.
32). Refer to local
g032703
25