Toro GrandStand Multi Force 72524 Operator's Manual page 35

Figure 46
6. Start the engine and drive to a flat area.
7. Check the oil level again.
Changing the Engine-Oil Filter
Service Interval: Every 200 hours
Note:
Change the engine-oil filter more frequently
when operating conditions are extremely dusty or
sandy.
1. Drain the oil from the engine; refer to
the Engine Oil (page
2. Change the engine-oil filter
g194610
Note:
Ensure that the oil-filter gasket touches
the engine, then rotate the filter an extra 3/4 turn.
3. Fill the crankcase with the proper type of new
oil; refer to
35
34).
(Figure
Figure 47
Engine-Oil Specifications (page
Changing
47).
g032710
g027477
33).