Table of Contents
Advertisement
Preventing Freeze-up after
Use
•
In snowy and cold conditions, some controls and
moving parts may freeze. Do not use excessive
force when trying to operate frozen controls.
If you have difficulty operating any control or part,
start the engine and let it run for a few minutes.
Thaw frozen parts before operating the machine.
•
After using the machine, let the engine run for a
few minutes to prevent moving parts from freezing.
Shut off the engine, wait for all moving parts
to stop, and remove all ice and snow from the
machine.
Using the Fuel-Shutoff
Valve
Close the fuel-shutoff valve for transport, maintenance,
and storage
(Figure
28).
Ensure that the fuel-shutoff valve is open when
starting the engine.
Figure 28
1. O
position
N
g032688
g031238
2. O
position
FF
Pushing the Machine by
Hand
The bypass valves allow you to push the machine by
hand without the engine running.
Important:
Always push the machine by hand.
Do not tow the machine, because hydraulic
damage may occur.
Important:
Do not start or operate the machine
with the bypass valves open. Damage to system
may occur.
23
Figure 29
g306777
Advertisement
Table of Contents
