Figure 88
Left Side of 60-inch Deck Shown
1. Bolt
2. Washer
3. Nut
6.
Rotate the caster wheels forward.
7.
Slide the mower deck out from under the
machine.
8.
If you are using the machine in a winter
application without a PTO-powered attachment,
remove the clutch to prevent corrosion as
follows:
A.
Unplug the wire harness from the clutch
(Figure
89).
g033738
4. Lift plate
5. Mower-deck hanger
1. Wire harness
2. Clutch
3. Washer
B.
Remove the bolt, washer, spring washer,
and clutch
C.
Apply anti-seize compound to the crank
shaft, then install the bolt, washer, spring
washer, and a spacer (Toro part no.
136-5411) to the shaft
1. Crank shaft
2. Spacer
3. Washer
D.
Apply dielectric grease to the connector and
use a cable tie to secure it to the machine.
55
Figure 89
4. Spring washer
5. Bolt
(Figure
89).
(Figure
90).
Figure 90
4. Spring washer
5. Bolt
g226599
g226598