Firmware Upgrade - Creality Falcon2 Quick Manual

please contact us via the phone number or email address provided at the end of the Quick Guide. Besides,
video instructions are available on the TF card for your reference.
You can also visit Creality's official website (www.cxsw3d.com) to learn more about software and hardware, contact,
operation, maintenance, etc.
固件升级
从 https://www.crealitycloud.cn/en/software-firmware/other?type=16 下载最新固件， 备份并删除 TF 卡中的文件后， 将
bin 文件保存至 TF 卡根目录。

Firmware Upgrade

Download the latest firmware from https://www.crealitycloud.cn/en/software-firmware/other?type=16， back up and
delete the files in the TF card, and save the bin file to the root directory of the TF card.
主板固件
断电状态下将 TF 卡插入卡槽， 机器通电自动更新。 更新过程蜂鸣器会一直发出响声， 响声结束则更新完成 （期间不可断电） 。
Motherboard Firmware
When the machine is powered off, insert the TF card into the card slot, and it will automatically update the firmware
when it is powered on. The buzzer will keep beeping during the update process, and the update will be completed when
the beep ends (please keep the power on till completion).
激光模组固件
断电状态下将 TF 卡插入读卡器， 通过 A 对 C 转接头插入激光模组顶部的 Type-C 接口中， 机器通电自动更新。 更新过程中激
光模组的指示灯会变成橙色跑马灯效果， 跑马灯结束则更新完成 （期间不可断电） 。
Laser Module Firmware
When the machine is powered off, insert the TF card into the card reader, then insert it into the USB-C port on the
top of the laser module through the USB-A to USB-C adapter, and the firmware will automatically update when it is
powered on. During the update process, the indicator of the laser module will turn orange with a marquee effect, and the
update will be completed when it stops the marquee effect (please keep the power on till completion).
02