Pvx Settings - Polycom ReadiConvene Deployment Manual

PVX Settings

c
Password—Specifies the password that authenticates the system
to the LCS. The user password must contain at least 9 characters.
This password will be used when defining the user account for
this endpoint in the LCS.
d
Registrar Server—Enter the IP address of the LCS server.
By default, the SIP signaling is sent to port 5060 on the registrar
server. To specify a different port, add it to the address as shown
here: 10.11.12.13:5070.
e
Proxy Server—Enter the same address as the Registrar server as
the LCS performs both tasks.
4
Save the network settings.
To set up the PVX for SIP conferencing:
1
Upgrade the PVX application to version 8.0.
a Version 8.0 has to be purchased through one of Polycom's
channel partners.
b
Once purchased, follow the version installation procedure as
described in the version's release notes.
c Activate the software through Polycom Resource Center (PRC)
using the license number.
Polycom-Microsoft Deployment Guide
2-35