Procedure 3-Live Communications Server Installation And Activation - Polycom ReadiConvene Deployment Manual

Microsoft—Polycom Environment Setting
Procedure 3—Live Communications Server Installation and
Activation
2-6
1
If the LCS 2005 is installed on a computer other than the one used for
the Domain Controller, log on to the second server (LCS Server) as an
administrator. Otherwise, skip this step.
2
Start the Live Communications Server 2005 Setup.
The Live Communication Server wizard opens.
3
Click Standard Edition Server.
4
Click Install Files for Live Communications Server.
5 Follow the wizard on-screen instructions with the following:
6 In the Server Activation window, click Yes.
7
In the Welcome to the Activate Live Communications Server wizard, click
Next.
— In the Select Account page, enter a new or existing service account
(LCS Service is listed by default) and specify and confirm the
password.
— If you specify a new account, the wizard creates and configures
this account automatically.
8
Click Next.
9
In the Enable IM Archiving page, verify that the check box is cleared,
and then click Next.
10 In the Start Service Option page, verify that the Start the service after
activation check box is selected.