Polycom ReadiConvene Deployment Manual page 130

Ad-hoc Conferencing and Active Directory Integration
4-14
a
In the Name box, enter the name defined in the LCS for the user
account representing the Entry Queue. The MGC system is case
sensitive.
b
In the Entry Queue Service list, select the Message Service to be
used with this Entry Queue. Select the appropriate service if
External database validation is required.
c
In the Numeric ID field, enter a number that can be used for
dialing from an H.323 endpoint to connect to the Entry Queue. If
left blank, the system will automatically assign one.
d
Select the Ad Hoc check box to enable ad hoc conferencing.
e
In the Profile list, select the Profile to be used for the definition of
the target conference. The Profiles list includes all the profiles
currently saved on the MCU.
f If the Entry Queue will be also used by ISDN or PSTN endpoints
to connect to the Entry Queue, assign a dial-in number to the
Entry Queue. If no number is assigned, when the Entry Queue is
saved on the MCU, the MCU will automatically assign a dial-in
number from the range of dial-in numbers defined in the default
ISDN Network service. Otherwise, skip this step.
g Click OK.