Defining The Ad Hoc Conferencing Components In The Mgc Environment; Mcu Configuration To Access The External Database Application - Polycom ReadiConvene Deployment Manual

Defining the Ad Hoc Conferencing
Components in the MGC Environment
MCU Configuration to Access the External Database
Application
This section describes the procedures for configuring the conferencing
components in the MGC Manager application. The creation of the User
accounts for the Entry Queue is described in Chapter 2. The addition of
the Entry Queue to the Office Communicator contacts list is described in
Chapter 3.
In Ad-hoc conferencing with Active Directory validation, access to the
Active Directory database must be configured for the MCU in the MGC
Manager application, in the "system.cfg" file.
To set the external database flags in the system configuration file:
1
In the MGC Manager application, right-click on the MCU icon, click
MCU Utils, and then click Edit "system.cfg".
The SysConfig dialog box opens.
2
In the Section pane, double-click the EXTERNAL DB option.
The External DB flags are displayed in the Item =Value pane.
3 In the Item=Value pane, define the following flags:
Table 4-1 System.cfg Values for Accessing External Database Application
Flag
EXTERNAL_DB_IP
EXTERNAL_DB_PO
RT
EXTERNAL_DB_LO
GIN
EXTERNAL_DB_PA
SSWORD
Polycom-Microsoft Deployment Guide
Description and Value
The IP address of the Active Directory server.
The port number used by the MCU to access the
Active Directory server.
The user name defined in the Active Directory for
the MCU. The default user name is: POLYCOM.
The password associated with the user name
defined for the MCU in the Active Directory. The
default password is: POLYCOM.
4-9