Polycom ReadiConvene Deployment Manual page 44

Microsoft—Polycom Environment Setting
2-32
d
In the Target Conferences box, select Transcoding to allow all
endpoint types to connect to the conference. If your MCU does
not include a video card, select Video Switching.
e
Make sure that the Audio and Video parameters are set to Auto
to let the system select them.
f
In the Line Rate field, select the line rate at which the participant
will connect to the target conference. This should be the rate
defined in all the Meeting Rooms and Ongoing conferences.
g
If the Entry Queue will also be used by ISDN or PSTN endpoints
to connect to the Entry Queue, assign a dial-in number to the
Entry Queue. If no number is assigned, when the Entry Queue is
saved on the MCU, the MCU will automatically assign a dial-in
number from the range of dial-in numbers defined in the default
ISDN Network service. Otherwise, skip this step.
h
Click OK.