Core Temperature Probe Mode (Optional) - Alto-Shaam Combitherm CT Express CTX4-10E Manual

Core Temperature Probe Mode
As an alternative to timer operation, the Core
Temperature Probe mode can be used in conjunction
with any program mode to cook by sensing internal
product temperature using the included probe. For
a more accurate internal temperature, an optional,
specialized, Combitherm product probe senses
temperature from four strategic points and displays a
temperature average.
1. Press the Power Button to power oven on.
2. Attach removable probe before activating
core temperature function, and insert into
product.
The probe must be inserted so that the tip is
positioned in the center of the food mass. For
liquid or semi-liquid foods, suspend the probe
in the center of the product and secure the
probe wire to the edge of the container.
3. Touch the required cooking mode icon. The
last set values or oven control default setting
345°F
for temperature and time will appear in the
1:43
display.
45
225°F
4. Touch the Start icon to cook at the displayed
settings.
5. Touch the displayed time.
The cooking time will appear at the top the
time selection window. Type in desired time
period or use up and down arrows to adjust
time. When finished, touch the blue check
mark icon
6. Touch the Probe temperature field to the right
of the icon.
The previously set core temperature or default
setting will appear highlighted within the oven
display. Touch the displayed core temperature.
The internal product core temperature will
appear at the top of the temperature selection
window. Type in desired internal product core
temperature or use up and down arrows to
adjust temperature. When finished, touch
the blue check mark icon
change.
345°F
1:43
45
225°F
to confirm change.
to confirm
30 MN-29806 • Rev 8 • 02/23 • COMBITHERM CT EXPRESS SERIES • STEP-BY-STEP MANUAl
•
(Optional)
345°F
1:43
45
225°F
7. Touch the green Start arrow icon to begin
cooking.
• The actual internal product temperature will
appear next to the
To change the set value for core temperature,
touch the temperature next to the 6
and make changes as required.
5
4
8. Touch for Steam Injection at any time during
cooking. Steam will inject into the cavity as long
3
as the icon is touched.
2
• When the operator-set internal temperature
has been reached, an alarm will sound
1
indicating the end of the operating mode.
• To stop the alarm, touch the red Stop icon
or open the oven door.
To stop a cooking program at any time, touch
the red Stop icon.
Calibrate the ExpressTouch Oven Probe
1. With the ExpressTouch oven on, fill a pitcher
of ice water and place inside the combi
oven.
2. Insert the probe into the pitcher of ice
water.
3. Check the temperature by selecting the Probe
button on the cooking mode menu.
4. Once the temperature reading is 35°F (2°C),
touch the back arrow button in the lower left
hand corner of the screen to return to the
main menu screen.
5. Touch Settings.
6. Touch Probe.
7. Adjust the temperature control back 3
degrees using the minus button, then touch
the back arrow to return to the Settings
screen.
8. The probe has now been calibrated to the
correct temperature.
icon during operation.
icon