Core Temperature Probe; Calibrating Expresstouch Probe - Alto-Shaam CT Express Combitherm CTX4-10E Operation Manual

E X P R E S S T O U C H O P E R A T I N G I N S T R U C T I O N S
CORE TEMPERATURE PROBE MODE (OPTIONAL)
As an alternative to timer operation, the Core
Temperature Probe mode can be used in conjunction
with any program mode to cook by sensing internal
product temperature using the included probe. For a more
accurate internal temperature, an optional, specialized,
Combitherm product probe senses temperature from four
strategic points and displays a temperature average.
PRESS ON BUTTON TO POWER OVEN ON.
ATTACH REMOVABLE PROBE BEFORE ACTIVATING
CORE TEMPERATURE FUNCTION, AND INSERT
INTO PRODUCT.
The probe must be inserted so that the tip is positioned
in the center of the food mass. For liquid or semi-liquid
foods, suspend the probe in the center of the product and
secure the probe wire to the edge of the container.
TOUCH THE REQUIRED COOKING MODE ICON.
The last set values or oven control default setting for
temperature and time will appear in the display.
TOUCH THE START ICON TO COOK AT THE
DISPLAYED SETTINGS, OR
TOUCH THE DISPLAYED TEMPERATURE.
The cooking temperature will appear at the top of
the temperature selection window. Type in desired
temperature or use up and down arrows to adjust
temperature. When finished, touch the green check mark
key to confirm change.
TOUCH THE PROBE ICON.
The previously set core temperature or default setting
will appear highlighted within the oven display. Touch
the displayed core temperature. The internal product core
temperature will appear at the top of the temperature
selection window. Type in desired internal product
core temperature or use up and down arrows to adjust
temperature. When finished, touch the green check mark
key to confirm change.
345°F
1:43
45
225°F
MN-29806 (R . 3) • CT EXPRESS STEP BY STEP OPERATION MANUAL •
ev
TOUCH THE GREEN START ARROW ICON TO
BEGIN COOKING.
• The actual internal product temperature will appear
next to the icon during operation. To change the set
6
value for core temperature, touch the temperature next
to the icon and make changes as required.
5
4
PRESS FOR STEAM INJECTION AT ANY TIME
DURING COOKING. Steam will inject into the cavity
3
as long as the icon is touched.
2
When the operator-set internal temperature has been
reached, an alarm will sound indicating the end of the
1
operating mode.
• To stop the alarm, touch the red stop icon
the oven door.
TO STOP COOKING PROGRAM AT ANY TIME,
PRESS RED STOP ICON.
NOTE: CALIBRATE THE EXPRESSTOUCH
OVEN PROBE
With ExpressTouch oven on, fill a pitcher of ice
water and place inside the combi oven.
Insert probe into the pitcher of ice water.
Check the temperature by selecting the "probe"
button on the cooking mode menu.
Once the temperature reading is 35 degrees,
touch the back arrow button in the lower left
hand corner of the screen to return to the main
menu screen.
Touch the "Settings" button.
Touch the "Probe" button.
Adjust the temperature control back 3 degrees
using the minus key, then touch the back arrow to
return to the "Settings" screen.
The probe has now been calibrated to the
correct temperature.
or open
19