Table of Contents
Advertisement
Creative Sewing
Reversing the stitch sequence
> Select a stitch pattern, alphabet or buttonhole.
> Tap «Stitch Designer».
> Tap «Single Point is Selected».
> Tap «Select all Points».
> Tap «Reversing the Stitch Sequence».
Designing a stitch pattern from scratch
> Select a stitch pattern, alphabet or buttonhole.
> Tap «Stitch Designer».
> Tap «Virtual Sewing Out».
Determining the stitch pattern width
The width of the stitch pattern is limited to 9 mm. To sew wider patterns, for example Sideways Motion
patterns, it is necessary to deactivate the limitation.
> Select a stitch pattern, alphabet or buttonhole.
> Tap «Stitch Designer».
> To deactivate the limitation, tap «Limiting Pattern Width».
> To activate the limitation, tap «Limiting Pattern Width» again.
5.9 Securing Stitches
Securing a seam with the button «Securing»
The «Securing Stitches» button can be programmed with various securing stitches.
> Pressing the «Securing Stitches» button before starting to sew.
> Press the «Securing Stitches» button while sewing.
Securing with the Button «Pattern End»
The «Pattern End» button can be programmed with various securing stitches.
> Push the button «Pattern End» before sewing is started or while sewing.
5.10 Height Compensation of Uneven Layers
If the presser foot is at an angle when sewing over a thick seam, the feed dog cannot grip the fabric and the
sewing project cannot be sewn out properly.
80
– The stitch pattern/stitch pattern combination is secured with the number of programmed stitches
when sewing is started.
–
The machine stops immediately and secures with the number of programmed stitches.
–
While sewing, a stop icon indicates that the function is activated and the stitch pattern or the current
combination of a stitch pattern will be secured at the end with the programmed number of stitches.
Advertisement
Table of Contents
