6.4 Section 4 – Signals
4a
Stitch width and stitch length knob(s)
4b
Functions of keys and buttons on machine
4c
Start-/Stop Slide (SSU)
4d
Foot control
4f
Upper Thread Observer (UTO)
4g
BERNINA Stitch Regulator (BSR)
4h
PCBA-Position
4i
Speaker
4j
USB ports
4k
Basting solenoid
4l
Presser-foot recognition
4m
BSR foot interface
4a Stitch width and stitch length knob(s)
Is used to check function of stitch width and stitch length knobs
Check:
• Select test 4a.
• Turn the stitch length or the stitch width knob.
• The respective bar will fill to reflect the movement.
• To return to section 4, press
Repair note:
•
Check knobs and PCBA-Front cover for correct fit and fitting.
•
Replace PCBA-Front cover (4.2.7).
•
Replace PCBA-Base
BERNINA International AG
or
.
(see
4.2.4).
Seestrasse 161
CH-8266 Steckborn
DRAFT – VERSION
Schweiz
Seite 132 von 172