Sewing Blind Hems - Bernina 790 PLUS User Manual

Hide thumbs Also See for 790 PLUS:
Table of Contents

Advertisement

Practical Stitches
> Select the needle position to the far right in order to sew along the upper edge.

6.18 Sewing Blind Hems

For invisible hems in medium to heavy weight cotton, wool and blended materials.
Prerequisite:
> Fit the Blindstitch Foot #5.
> Tap «Practical Stitches».
> Select Blind Stitch No. 9.
> Fold the fabric so that the finished fabric edge is on the right side.
> Place the fabric under the presser foot and move the folded edge against the metal guide on the presser
> Guide the folded edge evenly along the metal guide of the presser foot to sew the stitches evenly deep.
> After sewing about 10 cm, check both sides of the fabric and adjust the width again if necessary.
94
The fabric edges are finished.
foot.
– Make sure that the needle only pierces the edge of the fold.

Advertisement

Table of Contents
loading

This manual is also suitable for:

790 plus anniversary edition790 plus crystal edition

Table of Contents