Table of Contents
Advertisement
Sewing preparation
> Tap «Presser Foot Pressure».
50
> Adjust the Presser Foot Pressure.
2.9 Instruction for adjusting the feed dog
> Tap «Feed Dog Up/Down».
> Raise or lower the feed dog according to the animation.
2.10 Needle and stitch plate
Changing the needle
> Raise the needle.
> Switch the machine off and disconnect it from the power supply system.
> Remove the presser foot.
> Loosen the fixing screw of the needle using the screwdriver gray Torx.
> Pull the needle down.
> Hold the new needle with the flat side to the back.
> Insert the needle as far as it will go.
> Tighten the fixing screw of the needle using the screwdriver gray Torx.
Selecting the needle in the User Interface
After changing the needle, you can check whether this can be used with the selected stitch plate.
> Tap «Stitch Plate/Needle Selection».
> Select the fitted needle.
39
Advertisement
Table of Contents
