Table of Contents
Advertisement
Embroidery
16 Embroidery
16.1 Embroidering via the button «Start/Stop»
In case of a power cut the embroidery process is interrupted. After the restart the machine goes to the
position which was embroidered last.
> Push the button «Start/Stop» until the embroidery machine starts.
> Change the upper thread.
> To embroider the new color, push the button «Start/Stop».
> After completing the embroidery design, finish the embroidering process by tapping the icon
16.2 Increasing the Embroidery Speed
To ensure the best embroidery quality, the speed when embroidering is reduced depending on the
embroidery position. Choose between the two options to either embroider at optimal or maximum speed.
Standard = optimal speed. It has to be considered that the quality of the embroidered embroidery design at
maximum speed cannot be ensured.
By switching the machine off and on, the optimal embroidery speed is activated.
Prerequisite:
•
> Tap «Embroidery Speed».
> Tap «Embroidery Speed» again.
16.3 Adjusting the upper thread tension
The default setting of the upper thread tension is set automatically as soon as a stitch pattern or an
embroidery motif is selected.
When of using other types of sewing or embroidery threads, the optimal tension may vary. Therefore it may
be necessary to adjust the upper thread tension according to the sewing or embroidering project as well as
the desired stitch pattern or the embroidery motif individually.
The higher the upper thread tension, the tighter the upper thread which means that the bobbin thread is
pulled up to the top of the fabric. When the upper thread tension is low, the upper thread is less tightened
which means that the bobbin thread is pulled up less.
166
– All parts of the design being in the current color are embroidered.
– The embroidery machine stops automatically at the end.
– Both threads are cut automatically.
– The embroidery machine switches to the next color automatically.
«Completing the Embroidering Process» (1) or embroider the embroidery design again as trim by tapping
the icon «Endless Embroidery» (2).
1
Embroidering has started.
– The maximum speed is activated.
– The optimal speed is activated.
2
Advertisement
Table of Contents
