Reversing The Stitch Sequence; Designing A Stitch Pattern From Scratch; Determining The Stitch Pattern Width; Securing Stitches - Bernina 790 PRO Manual

Reversing the Stitch Sequence

> Select a stitch pattern, alphabet or buttonhole.
> Tap «Stitch Designer».
> Tap «Select a Single Point».
> Tap «Select all Points».
> Tap «Reverse the Stitch Sequence».

Designing a Stitch Pattern from Scratch

> Select a stitch pattern, alphabet or buttonhole.
> Tap «Stitch Designer».
> Tap «Virtual Sew Out».

Determining the Stitch Pattern Width

The width of the stitch pattern is limited to 9 mm. To sew wider patterns, for example Sideways Motion
patterns, it is necessary to deactivate the limitation.
> Select a stitch pattern, alphabet or buttonhole.
> Tap «Stitch Designer».
> To deactivate the limitation, tap «Limit Pattern Width».
> To activate the limitation, tap «Limit Pattern Width» again.

5.9 Securing Stitches

Securing a Seam with the Button «Securing»
The «Securing Stitches» button can be programmed with various securing stitches.
> Pressing the «Securing Stitches» button before starting to sew.
– The stitch pattern/stitch pattern combination is secured with the number of programmed stitches
when sewing is started.
> Press the «Securing Stitches» button while sewing.
– The machine stops immediately and secures with the number of programmed stitches.
Securing with the Button «Pattern End»
The «Pattern End» button can be programmed with various securing stitches.
> Push the button «Pattern End» before sewing is started or while sewing.
– While sewing, a stop icon indicates that the function is activated and the stitch pattern or the current
combination of a stitch pattern will be secured at the end with the programmed number of stitches.
Creative Sewing
83