Table of Contents
Advertisement
Important safety instructions
Safety Instructions
•
While operating the machine, all
protective inserts must be in place and all
covers must be closed.
Appropriate Use
•
The machine may be used, cleaned and
maintained by children older than eight or
by people with reduced physical, sensory
or mental capabilities or if there is a lack
of experience and knowledge as long as
they have been given instructions.
•
Furthermore, these persons must be
supervised while working with the
machine, and/or they must know the safe
operation of the machine and be aware
of the resulting hazards.
•
Children are not allowed to play with the
system.
•
Special care should be taken when the
machine is operated by or in the presence
of children.
•
Only use the machine with the supplied
power cable.
•
USA and Canada only: Do not connect
power plug NEMA 1-15 to circuits
exceeding 150 volt-to-ground.
•
Only use this machine with the supplied
foot control of type LV-1.
•
Do not insert any objects into the
openings of the machine.
•
Do not place any objects on the foot
control.
•
While sewing, guide the fabric gently.
Pulling and pushing the fabric can cause
needle breakage.
•
Keep fingers away from all moving parts.
•
Special care is required in the needle area.
•
For activities in the needle area - such as
threading the needle, changing the
needle, threading the looper or changing
the presser foot - switch off the machine.
•
To switch off, set the power switch to
«0».
10
•
When protective covers are removed,
when the machine is oiled or when other
cleaning and maintenance operations
mentioned in this instruction manual are
carried out, switch off the machine and
disconnect the power plug from the
outlet.
•
Pull the plug out of the outlet by pulling
on the plug. Do not pull on the cable.
Safety Signs on the
Machine
Safety signs
Purpose
Caution; moving parts.
ATTENTION
CAUTION
Pièces en rotation!
Moving Parts!
Pour rèduire les risques de
To reduce risk of
injury.
blessure.
Dèconnecter avant toute
Switch off
opération d'entretien.
before servicing.
To reduce the risk of injury,
switch off the machine before
maintenance work.
Advertisement
Table of Contents
