Table of Contents
Advertisement
Setup Program
> Tap «Programming Buttons and Icons».
> Tap «Pressure Foot Position with Needle Stop Down».
> Select the desired presser foot position.
Programming the button «Quick reverse»
It can be either chosen «Reverse Sewing» or «Backstepping».
> Tap «Setup Program».
> Tap «Sewing Settings».
> Tap «Programming Buttons and Icons».
> Tap «Programming the Button Quick Reverse».
> To set the stitch-precise reverse sewing, tap «Back Stepping».
> To set the reverse sewing, tap «Quick Reverse».
Programming the button «Securing»
The number and type of securing stitches can be programmed.
> Tap «Setup Program».
> Tap «Sewing Settings».
> Tap «Programming Buttons and Icons».
> Tap «Programming the Button Securing».
> To program subsequent securing stitches, tap «Securing Stitches in Close Succession».
> To program the number of securing stitches, tap «Minus» or «Plus».
> To program 4 securing stitches in place, tap «Securing Stitches in Place».
Programming the foot control
If «Needle Up/Down» is activated, the needle is raised or lowered with the back-kick on the foot control.
Alternatively, the presser foot can be positioned, the thread can be cut and the automatic securing can be
programmed.
> Tap «Setup Program».
> Tap «Sewing Settings».
51
Advertisement
Table of Contents
