Table of Contents
Advertisement
Creative Embroidering
> Select the desired position in the compact view.
> To move the hoop stitch by stitch, turn the «Upper Multi-function Knob».
> To move the hoop in large steps, turn the «Lower Multi-function Knob».
> To select the desired stitch by entry, tap the icon «Stitch Position via Number».
0-9
0-9
Cutting Connecting Stitches
The function is activated as standard and the connection stitches are automatically cut. If the function is
deactivated, the connection stitches must be cut by hand.
> Select the embroidery design.
> Tap «Embroidery».
> To switch off the function, tap «Cut Connecting Stitches».
> To switch on the function, tap «Cut Connecting Stitches» again.
Reducing Color Changes
When the embroidery designs overlap, the color changes cannot be reduced.
> Select the embroidery design.
> Tap «Embroidery».
> Tap «Reduce Color Changes».
Multi-colored Embroidery Design On/Off
Multi-colored embroidery designs can also be embroidered in one color.
> Select the embroidery design.
> Tap «Embroidery».
> Tap «Multi-colored Embroidery Design On/Off».
Endless Embroidery
This makes it possible to embroider trims that have already been started, even if the machine has been
switched off and on.
Prerequisite:
•
> Select trim embroidery designs from the separate storage medium.
> Tap «Embroidery».
160
– The number in the yellow-outlined icon indicates the number of stitches within the embroidery
sequence.
–
Identical colors of the embroidery design are collected to one color.
–
The embroidery design is embroidered in one color.
A trim embroidery design must be saved on a separate storage medium. The reference points must be
included in the embroidery design.
Advertisement
Table of Contents
