Table of Contents
Advertisement
Attach the 1/4" inverted flare x 18" Type-1 pigtail hose
4.
to the regulator inlet and the right hand swivel nut to the
cylinder valve.
Main Supply Hose – Low Pressure
Attach the main supply hose from the regulator
to the brass manifold fitting in the frame of the
trailer. The swivel brass nut on the main hose
will be your final attachment.
Each time the propane container is removed:
Check that ALL fittings are tight.
1.
2.
Check that ALL connections are tested with a propane
leak detector (or soapy water) solution.
Open the main valve slowly to avoid a fast rush of propane to the excess flow valve
3.
causing propane freeze up. If you experience a propane "freeze-up," close the main
valve and wait at least fifteen (15) minutes before trying again. Refer to the regulator
manufacturer's operator manual.
4.
Listen carefully - a "hissing" sound longer than one second may indicate a propane
leak. If you feel there may be a leak present, close the valve and contact your dealer or
qualified propane technician for repair assistance.
Replace all protective covers and caps on the propane system after filling. Make sure the
valve is closed and the compartment door is securely latched.
Section 7: Fuel & Propane System
Table of Contents
Main Supply Hose
Two Propane Cylinders
99
Advertisement
Table of Contents
