Table of Contents
Advertisement
Section 4: Vehicle Operation
Hitch Recognition
OneControl App (for phone or tablet)
1.
Download the OneControl App for your device from Google Play Store or ITunes.
2.
To access the OneControl App, ensure there is power to the RV's wireless network hub.
3.
Navigate to the device's Wi-Fi settings. Turn the wireless feature on and connect to the
MyRV® wireless network.
4.
A password will be required to access the network. The password is found on the RV's
wireless hub (8 capital alpha characters).
5.
Open the OneControl App on the phone or tablet.
6.
The App will request the user to "Agree" with a license agreement, connect to the
MyRV® system by entering the PIN (default is 1,2,3,4 for OneControl Touch Panel). It
will prompt you to create a new PIN and then re-enter the new PIN.
™ NOTE: The PIN is not needed or asked for if the tablet is attached to the
docking station and connected to the USB cable inside the RV.
7.
The App will now display all functions. Choose Leveler.
The following functions can be operated using the OneControl App. Basic Jack operation
Unhitching Instructions
Auto Leveling
Linc Remote Control
Configuring the remote to sync with the OneControl Touch panel:
Press the chrome button on the bottom of the remote to turn it on. Enter the PIN
(default is 0,0,0,0). The PIN can be changed after entering the default PIN. A
menu will appear, choose Leveler from that menu.
Turn the OneControl Touch Panel ON inside the RV.
At the top of the Touch Panel screen press the "CONNECTED" icon quickly (6)
times.
A GEAR icon will appear at the top of the screen that says "OPTIONS". Press
the GEAR icon.
Screen display changes to "Select Operation" with arrows on the left side of the
screen. Use to arrows on left side of screen. Scroll to "WIRELESS CONFIG".
Press the ENTER button at the bottom of the screen.
The screen will display "Wireless Configuration Press any Linc button to
sync".
Press any button on the remote control while in Leveler mode and the remote will
be connected.
Pressing the ABORT button on the touch screen will cancel the configuration sequence.
The following functions can be operated using the Linc Remote Control. Refer to the manu-
facturer's manual for complete instructions.
Basic Jack operation
Unhitching Instructions
Auto Leveling
Troubleshooting
Refer to the manufacturer's manual for troubleshooting information which includes the fol-
lowing:
OneControl Touch Panel Error Codes
Special Jack Error Codes on the OneControl Touch Panel
How to manually override the jack motor
42
Table of Contents
Advertisement
Table of Contents
