Table of Contents
Advertisement
EXT Button – Used to extend either slideouts or awnings. Used in conjunction
with the arrow buttons to select an awning or slideout (also used when pairing
your smart phone or tablet to the system).
RET Button – Used to Retract either slideouts or awnings. Used in conjunction
with the arrow buttons to select an awning or slideout (also used when pairing wall
mounted remotes to the system).
Menu Display (between arrow buttons) use the arrow keys to scroll through the selections.
Menu Display shows A1 or A2 (awnings). Cycle between awnings with the
arrows. Press and hold EXT or RET to extend or retract the selected awning.
Menu Display shows b1 or b2 (bunk lifts).
Cycle between bunk lifts with the arrows press EXT or RET to operate.
Menu Display shows J1, J2, J3 or J4 (jacks).
Cycle between jacks then press EXT or RET to operate.
Menu Display shows S1, S2, S3 or S4 (slideouts).
Cycle between slides using the arrow buttons. Press and hold EXT or RET to
extend or retract the selected slideout.
Menu Display shows OF (must then press the EXT button) to turn off all loads
(lights and fans plus touchscreen). This does not shut down the generator. Press
any of the numbered light buttons to turn the touchscreen back on.
Menu Display shows PA (pair). Press EXT to pair your phone or tablet or press
RET to pair one of the wall mounted remote controls. The PA on the small dis-
play will flash on and off indicating the system is in pairing mode and can be
connected to a Bluetooth smart device. When the device is paired, PA display
will go out.
Turning on the touchscreen system
The touchscreen system automatically boots up when power is turned ON to the RV.
If the touchscreen system requires a reset, or if the touchscreen has been turned off:
Pressing either of the arrow keys, or a numbered key will turn the system ON
(EXT or RET keys will not turn on the system).
Two splash screens with the BMPRO logo will appear first during boot up.
To go to the RVMaster touchscreen, press the icon for the touchscreen (or let the
boot up process finish).
The RVMaster touchscreen is now active and ready to use.
™ NOTE Pressing the RESET button on the touchscreen will also reboot the
touchscreen.
Pairing a smart device to the RVMaster app
Download and install the BMPRO RVMaster app from the Google Play Store or the Apple
App Store. When the app is started, press the Menu Display arrow keys until the small
display shows PA. Then press the EXT button to put the system in pairing mode. Open
the Bluetooth setting on your phone and select "RVGenius" in the list of devices available.
Once connected this app will control the devices in the RV. Up to (3) personal Bluetooth
devices can be connected to the RVMaster system. Only (1) device at a time can be paired.
™ NOTE: The RVMaster Motors screen automatically locks on your smart de-
vice after connecting to the app to prevent inadvertent operation of the sys-
tems in the RV. The lockout indicator on the screen must swiped to unlock
the motor controls. When operating any motor control, the system locks out
all other control devices (e.g. smartphone or command panel) until the mo-
torized device in use has stopped.
Section 6: Electrical System
Table of Contents
73
Advertisement
Table of Contents
