Table of Contents
Advertisement
- Select Custom Audio. You can select a custom audio file from the drop-down list. If no file is
available, you can click Set → Add to upload an audio file that meets the requirement. Up to
three audio files can be uploaded.
3. Optional: Click Test to play the selected audio file on the device.
4. Set arming schedule for audible alarm. See Set Arming Schedule for details.
5. Click Save.
Note
The function is only supported by certain device models.
7.2.7 Alarm Server
The device can send alarms to destination IP address or host name through HTTP, HTTPS, or ISUP
protocol. The destination IP address or host name should support HTTP, HTTP, or ISUP data
transmission.
Set Alarm Server
Steps
1. Go to Configuration → Event → Alarm Setting → Alarm Server .
2. Enter Destination IP or Host Name, URL, and Port.
3. Select Protocol.
Note
HTTP, HTTPS, and ISUP are selectable. It is recommended to use HTTPS, as it encrypts the data
transmission during communication.
4. Click Test to check if the IP or host is available.
5. Click Save.
Network Camera User Manual
48
Advertisement
Table of Contents
