Table of Contents
Advertisement
6.9 Set Scene Change Detection
Scene change detection function detects the change of the scene. Some certain actions can be
taken when the alarm is triggered.
Steps
1. Go to Configuration → Event → Event and Detection → Scene Change Detection .
2. Click Enable.
3. Set the Sensitivity. The higher the value is, the more easily the change of scene can be detected.
But the detection accuracy is reduced.
4. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for
setting linkage method.
5. Click Save.
Note
The function is only supported by certain models. The actual display varies with models.
Network Camera User Manual
43
Advertisement
Table of Contents
