Table of Contents
Advertisement
8.17 Set SDK Service
If you want to add the device to the client software, you should enable SDK Service or Enhanced
SDK Service.
Steps
1. Go to Configuration → Network → Platform Access → SDK Service .
2. Set SDK Service parameters.
1) Check Enable to add the device to the client software with SDK protocol.
2) Enter the Port number.
3. Set Enhanced SDK Service parameters.
1) Check Enable to add the device to the client software with SDK over TLS protocol.
2) Optional: Click TLS Settings to enable the TLS version that the device supports. Refer to TLS
for details.
3) Enter the Port number.
4) Select a server certificate to make sure the data transmission security. You can click Certificate
Management to add a certificate. Refer to Certificate Management for details.
4. Click Save.
Network Camera User Manual
62
Advertisement
Table of Contents
