Set Vibration Detection; Set Audio Exception Detection - HIKVISION iDS-2CD70C5G0/H-AP User Manual

3. Set the corresponding parameters.
Alarm Detection Interval
The time interval to detect the exception.
Sensitivity
The higher the value is, the more easily the exception will be detected, and the higher
possibility of misinformation would be.
Alarm Delay Times
The device uploads the alarm when the alarm reaches the set number of times.
4. Check the selected diagnosis type, and the related type will be detected.
5. Set arming schedule. See Set Arming Schedule .
6. Set linkage method. See Linkage Method Settings .
7. Click Save.
Note
The function is only supported by certain models. The actual display varies with models.

6.6 Set Vibration Detection

It is used to detect whether the device is vibrating. The device reports an alarm and triggers linkage
actions if the function is enabled.
Steps
1. Go to Configuration → Event → Event and Detection → Vibration Detection .
2. Check Enable.
3. Drag the slider to set the detection sensitivity. You can also enter number to set the sensitivity.
4. Set the arming schedule. See Set Arming Schedule .
5. Set the linkage method. See Linkage Method Settings .
6. Click Save.
Note
The function is only supported by certain models. The actual display varies with models.

6.7 Set Audio Exception Detection

Audio exception detection function detects the abnormal sound in the scene, such as the sudden
increase/decrease of the sound intensity, and some certain actions can be taken as response.
Steps
1. Go to Configuration → Event → Event and Detection → Audio Exception Detection .
2. Select one or several audio exception detection types.
Network Camera User Manual
41