Websocket(S); Port Mapping; Set Auto Port Mapping; Set Manual Port Mapping - HIKVISION iDS-2CD70C5G0/H-AP User Manual

8.12 WebSocket(s)

WebSocket or WebSockets protocol should be enabled if you use Google Chrome 57 and its above
version or Mozilla Firefox 52 and its above version to visit the device. Otherwise, live view, image
capture, digital zoom, etc. cannot be used.
Go to Configuration → Network → Network Service → WebSocket(s) to set parameters, and click
Save.
WebSocket
TCP-based full-duplex communication protocol port for plug-in free preview via HTTP protocol.
WebSockets
TCP-based full-duplex communication protocol port for plug-in free preview via HTTPS protocol.

8.13 Port Mapping

By setting port mapping, you can access devices through the specified port.
Steps
1. Go to Configuration → Network → Network Service → NAT .
2. Select the port mapping mode.
Auto Port Mapping
Manual Port Mapping Refer to Set Manual Port Mapping for detailed information.
3. Click Save.

8.13.1 Set Auto Port Mapping

Steps
1. Check Enable UPnP™, and choose a friendly name for the camera, or you can use the default
name.
2. Select the port mapping mode to Auto.
3. Click Save.
Note
UPnP™ function on the router should be enabled at the same time.

8.13.2 Set Manual Port Mapping

Steps
1. Check Enable UPnP™, and choose a friendly name for the device, or you can use the default
name.
Network Camera User Manual
Refer to Set Auto Port Mapping for detailed information.
56