Set Exception Alarm; Set Video Quality Diagnosis - HIKVISION iDS-2CD70C5G0/H-AP User Manual

Steps
1. Go to Configuration → Event → Event and Detection → Alarm Input .
2. Select an Alarm Input NO. and click
3. Select Alarm Type from the dropdown list. Edit the Alarm Name.
4. Check Enable Alarm Input Handling.
5. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for
setting linkage method.
6. Click Copy to... to copy the settings to other alarm input channels.
7. Click Save.

6.4 Set Exception Alarm

Exception such as network disconnection can trigger the device to take corresponding action.
Steps
1. Go to Configuration → Event → Event and Detection → Exception .
2. Select Exception Type.
HDD Full
The HDD storage is full.
HDD Error
Error occurs in HDD.
Network Disconnected
The device is offline.
IP Address Conflicted
The IP address of current device is same as that of other device in the network.
Illegal Login
Incorrect user name or password is entered.
Abnormal Reboot
The device reboots abnormally.
3. Refer to Linkage Method Settings for setting linkage method.
4. Click Save.

6.5 Set Video Quality Diagnosis

When the video quality of the device is abnormal and the alarm linkage is set, the alarm will be
triggered automatically.
Steps
1. Go to Configuration → Event → Event and Detection → Video Quality Diagnosis .
2. Select Diagnosis Type.
Network Camera User Manual
to set alarm input.
40