4.5 Set Target Cropping
You can crop the image, transmit and save only the images of the target area to save transmission
bandwidth and storage.
Steps
1. Go to Configuration → Video/Audio → Target Cropping .
2. Check Enable and set Third Stream as the Stream Type.
Note
After enabling target cropping, the third stream resolution cannot be configured.
3. Select a Cropping Resolution.
A red frame appears in the live view.
4. Drag the frame to the target area.
5. Click Save.
Note
Only certain models support target cropping and the function varies according to different
●
camera models.
Some functions may be disabled after enabling target cropping.
●
4.6 Display Info. on Stream
The information of the objects (e.g. human, vehicle, etc.) is marked in the video stream. You can
set rules on the connected rear-end device or client software to detect the events including line
crossing, intrusion, etc.
Before You Start
This function is supported in smart events. Go to VCA , select Smart Event and click Next to enable
Smart Event.
Steps
1. Go to Configuration → Video/Audio → Display Info. on Stream .
2. Check Enable Dual-VCA.
3. Click Save.
4.7 Display Settings
It offers the parameter settings to adjust image features.
Go to Configuration → Image → Display Settings .
Click Default to restore settings.
Network Camera User Manual
17