PRODUCT DESCRIPTION
1.7.4 Attention before first use!
Depending on how the motor shaft of your centrifuge is looking like, some action must be taken
before the first operation. Please note the shape of the motor shaft of your centrifuge.
There are two different versions:
Conical
motor shaft
Version 1
If the motor shaft is conical
If the motor shaft is cylindrical
8
remove the collet from the rotor by turning it
counter clockwise
Let the collet inside the rotor
Z366_V1.18_eng
Cylindrical
motor shaft
Version 2
The collet is no longer
needed
© Hermle Labortechnik GmbH