Configuring Display Settings
After you install the board and driver and set the default monitor
and refresh rate, you can change the resolution and refresh rate
or any other configuration options.
The Windows 2000 or XP operating system renumbers and
reassigns screens as they are added to the configuration. Set
resolutions or preferences only after all boards and screens are
installed. Then restart your system to make sure the screen
assignments are stable.
Determining screen assignments
Click Identify in the Settings tab to match screens to boards.
Use this tab...
To set the default monitor and refresh rate for...
DOME tab
Displays attached to the Windows 2000 desktop
Properties >
Displays not attached to the Windows 2000 desktop
Settings tab
Configuring Display Settings | 19