Taylor SLIM7 Operator's Manual page 28

USER INTERFACE
Set Clock
The SET CLOCK option allows the manager to adjust the
control clock, date, and time. The date and time may only
be changed after the freezer has been manually cleaned,
but before it has been placed in Auto or Standby mode.
The following message will be displayed if the Set Clock
option is selected:
To change the data or time, select the SET CLOCK
option in the menu. The hour setting is automatically
selected; press the Arrow buttons to increase or
decrease the value. Press the OK button to confirm the
value and to advance to the next entry. Enter the correct
5
minutes, day, month, and year then press the OK button
to save and return to the main menu.
Auto Heat Time
The AUTO HEAT TIME screen allows the manager to set
the time of day in which the Heat Treatment Cycle will
start if the machine is in Auto or Standby mode.
The hour setting is automatically selected; press the
Arrow buttons to increase or decrease the value. Press
the OK button to confirm the value and to advance to the
next entry. Enter the correct minutes and press the OK
button to save and return to the main menu.
5-6
Figure 5-8
Figure 5-9
Auto Start Time
The AUTO START TIME option allows the manager to
set the time of day at which the machine automatically
enters the Auto mode from the Standby/Storage mode.
The machine must be in the Standby/Storage mode
without a freezer lock condition in order to Auto start at
the programmable time. The Auto Start Time can also be
disabled and require starting the Auto mode manually.
The hour setting is automatically selected; press the
Arrow buttons to increase or decrease the value. Press
the OK button to confirm the value and to advance to the
next entry. Enter the correct minutes and press the OK
button to save and return to the main menu.
Note: Disable the AUTO START TIME by selecting "- -"
in "hours" settings.
Auto Standby Time
The AUTO STANDBY TIME option allows the manager to
set the time of day at which the machine automatically
enters the Standby mode from the Auto mode. This
allows power savings during slow sales. The Auto
Standby Time can also be disabled and require starting
the Standby mode manually.
Model 0736
Figure 5-10
Figure 5-11
User Interface