Taylor SLIM7 Operator's Manual page 46

OPERATING PROCEDURES
Hopper Agitation Adjustment in Standby Mode
1. With the machine filled with fresh mix, press the
Standby button.
2. Press the Standby and Option buttons
simultaneously for a few seconds until the adjustment
menu appears on the display.
3. The first menu item allows you to adjust the
temperature of the product in Standby mode. Press
the OK button to confirm the displayed value and
switch to the next entry.
6
6-14
Figure 6-44
4. Subsequent parameters allow the operator to change
the operating times (MIXING ON) and pause
(MIXING OFF) of the hopper agitator motor during
the Standby mode.
5. Press the Up Arrow button to increase the time;
press the Down Arrow button to decrease the time.
6. Press the OK button to confirm the new selected
value. Press C button to erase the new value.
7. Press the OK button to confirm the other menu items
and exit the menu by saving the changes.
Model 736
Figure 6-45
Operating Procedures