Symbol Definitions; Lcd Display; Indicator Icons On The Display And Buttons - Taylor SLIM7 Operator's Manual

USER INTERFACE

Symbol Definitions

To better communicate in the international area, symbols
have replaced words on many of our operator switches,
function, and fault indicators. Your Taylor machine is
designed with these international symbols.
The following chart identifies the symbol definition.
= MANAGER'S MENU
= UP ARROW
= DOWN ARROW
= OK
5
= CANCEL
= AUTO
= HEAT CYCLE
= STANDBY
= WASH
= OPTIONS
= STOP
= MIX HOPPER
5-2
Figure 5-2

LCD Display

The display is located on the front control panel. The
display is used to show menu options and notifies the
operator if a fault is detected. The display indicates also
the temperature of the mix in the hopper, in the barrel and
its level.
Indicator Icons on the Display and
Buttons
MIX LOW—When the MIX LOW icon is displayed, the
mix hopper has a low supply of mix and should be refilled
as soon as possible.
MIX OUT—When the MIX OUT icon is displayed (the
LEVEL message is displayed), the mix hopper has been
almost completely exhausted and has an insufficient
supply of the mix to operate the freezer. At this time, the
Auto mode is locked out and the freezer will be placed in
Standby mode. To initiate the refrigeration system, add
mix to the mix hopper. The freezer will automatically
begin operation.
BRUSH-CLEAN COUNTER—When the BRUSH CLEAN
COUNTER display has counted down to "1," the machine
must be disassembled and brush-cleaned within
24 hours.
Manager's Menu Button
The Manager's Menu is used to enter the operator
function displays. To access the Menu, press the SEL
button.
Up ARROW Button
If active, it increases the value of the set.
Down ARROW Button
If active, it decreases the value of the set.
OK Button
If active, it confirm the value of the set.
C Button
If active, it deletes the set value or exits the menu. In
Auto mode, the C button displays the temperature of the
barrel, the CTS system temperature and the glycol
temperature.
Auto Button
The Auto button will illuminate when it is pressed. This
indicates that the refrigeration system has been
activated. In the Auto mode, the Wash or Standby
functions are automatically canceled.
Model 0736
User Interface