Table of Contents
Advertisement
3.6 Wall Enclosure Rough Opening
WARNING: Provide adequate clearances around air openings into
the combustion chamber. Provide adequate clearance in front of the
fireplace for barrier removal, component access, gas line installation,
service access, etc.
•
Framing dimensions should allow for wall covering thickness
and fireplace facing materials. If using a hearth, adjust the rough
opening size as necessary to maintain minimum clearance
requirements.
Figure 3.4, Framing Dimensions and Requirements
14 FRAMING
•
If masonry (optional) is to be used, prepare the foundation
necessary for the full masonry load. A lintel must be used over
the top of the appliance to support the added weight of the
masonry construction above the fireplace.
½
44
"
(1130mm)
⁄
41
"
(1051mm)
½
17
"
(445mm)
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
SINGLE VERTICAL HEADER BOARD
IS REQUIRED TO MAINTAIN
CLEARANCES TO COMBUSTIBLES
#BAY-41-L & BW R.14 July 2019
Advertisement
Table of Contents
