Samsung S3C80M4/F80M4 User Manual page 245

S3C80M4/F80M4
"Device Selection"
Settings
Device Selection
80M4 84G5
Device Selection
80M4 84G5
SMDS2+ SELECTION (SAM8)
In order to write data into program memory that is available in SMDS2+, the target board should be selected to be
for SMDS2+ through a switch as follows. Otherwise, the program memory writing function is not available.
"SMDS2+" Setting
SMDS2
IDLE LED
The Yellow LED is ON when the evaluation chip (S3E84G0) is in idle mode.
STOP LED
The Red LED is ON when the evaluation chip (S3E84G0) is in stop mode.
Table 16-3. Device Selection Settings for TB80M4
Operating Mode
TB84G5
TB80M4
Table 16-4. The SMDS2+ Tool Selection Setting
SMDS2+
Operate with TB84G5
Target
System
Operate with TB80M4
Target
System
Operating Mode
R/W R/W
SMDS2+
DEVELOPMENT TOOLS
Comments
Target
System
16-5