Installation; Safety Information - Danfoss iC7 Series Installation Manual

In-back/out-top cooling kit for fa09-fa10, frequency converters
Hide thumbs Also See for iC7 Series:
Table of Contents

Advertisement

In-back/Out-top Cooling Kit for FA09-FA10
Installation Guide

2 Installation

2.1 Safety Information

QUALIFIED PERSONNEL
Only qualified personnel are allowed to install the parts described in these installation instructions.
-
Disassembly and reassembly of the frequency converter must be done in accordance with the corresponding service guide.
-
Use the standard fastener torque values from the service guide, unless the torque value is specified in these instructions.
ELECTRICAL SHOCK HAZARD
The frequency converter contains dangerous voltages when connected to mains voltage. Improper installation, and installing or
servicing with power connected, can cause death, serious injury, or equipment failure.
-
Only use qualified electricians for the installation.
-
Disconnect the frequency converter from all power sources before installation or service.
-
Treat the frequency converter as live whenever the mains voltage is connected.
-
Follow the guidelines in these instructions and local electrical safety codes.
DISCHARGE TIME (20 MINUTES)
The frequency converter contains DC-link capacitors, which can remain charged even when the frequency converter is not pow-
ered. High voltage can be present even when the warning indicator lights are off.
Failure to wait 20 minutes after power has been removed before performing service or repair work can result in death or serious
injury.
-
Stop the motor.
-
Disconnect AC mains, permanent magnet type motors, and remote DC-link supplies, including battery back-ups, UPS, and
DC-link connections to other frequency converters.
-
Wait 20 minutes for the capacitors to discharge fully before performing any service or repair work.
-
Measure the voltage level to verify full discharge.
ELECTROSTATIC DISCHARGE
Electrostatic discharge can damage components.
-
Ensure discharge before touching internal frequency converter components, for example by touching a grounded, conduc-
tive surface or by wearing a grounded armband.
Danfoss A/S © 2022.03
N O T I C E
W A R N I N G
W A R N I N G
N O T I C E
Installation
AN371942666355en-000101 / 136R0250 | 3

Advertisement

Table of Contents
loading

This manual is also suitable for:

176f4042176f4043

Table of Contents