Table of Contents
Advertisement
User's Manual
Press Amp soft key to set the amplitude, use numerical keyboard to input 1 and then select the unit of
parameter to Vpp;
Press DutyCycle soft key to set duty cycle, use numerical keyboard to input 50 and then select the unit of
parameter to %
3) Set Start/Stop Frequency, Sweep Time
Press Mode
Press Start or Stop soft key, use numerical keyboard to input 1 and then select the unit of parameter to
kHz. The default start frequency is 1 kHz.
Press Stop soft key, use numerical keyboard to input 50 and then select the unit of parameter to kHz.
Press Time soft key, use numerical keyboard to input 2 and then select the unit of parameter to ms.
Instruments.uni-trend.com
(the default duty cycle is 50%).
Sweep
Linear
to enter linear sweep.
UTG1000X Series
55 / 74
Advertisement
Table of Contents
