UNI-T UTG1000X Series User Manual page 27

User's Manual
Select Carrier Wave
The carrier wave can be sine wave, square wave, ramp wave or arbitrary wave. The default is sine wave. After
FM mode is selected, press Wave key to enter the carrier wave interface.
Set Frequency for Carrier Wave
Refer to Set Frequency for Carrier Wave
Select Modulation Wave
The modulation source of this instrument comes from internal, it is sine wave, square wave, rising ramp wave,
falling ramp wave, arbitrary wave and noise wave. The default is sine wave. When FM mode is enabled, the
default modulation wave is sine wave. It can be change by multifunction rotary knob or press
mode.
 Square Wave: Duty cycle is 50%.
 Rising Ramp Wave:
 Falling Ramp Wave:
 Arbitrary Wave: The length of arbitrary wave limits at 4 kpts by the method of select point automatically
when arbitrary wave is the modulation wave.
 Noise Wave: White Gauss noise
Instruments.uni-trend.com
in AM mode.
Symmetry is
100%.
Symmetry is
0%.
UTG1000X Series
ModWave in AM
27 / 74