UNI-T UTG1000X Series User Manual page 30

User's Manual
parameter to kHz;
Press Amp soft key to set the amplitude, use numerical keyboard to input 100 and then select the unit of
parameter to
4) Set Frequency Deviation
After the parameter setting of the carrier wave is completed, press Mode
setting,
FreqDev
Press
kHz.
5) Enabling Channel Output
Press CH1 key, if the indicator light is illumined which means the channel output is enabled.
Instruments.uni-trend.com
mV.
soft key and use numerical keyboard to input 5 and then select the unit of
 Shape  FM to enter FM mode
parameter to
UTG1000X Series
30 / 74