Table of Contents
Advertisement
User's Manual
UTG1000X Series
Press Freq soft key to set the frequency, use numerical keyboard to input 2 and then select the unit of
parameter to kHz;
Press Amp soft key to set the amplitude, use numerical keyboard to input 1 and then select the unit of
parameter to
Vpp.
5) Enabling Channel Output
Press CH1 key, if the indicator light is illumined which means the channel output is enabled.
To view the shape of the PSK through an oscilloscope as shown in the following figure.
Instruments.uni-trend.com
47 / 74
Advertisement
Table of Contents
