Table of Contents
Advertisement
User's Manual
2) Set Parameter and Wave for Modulation Signal
Base on the step 1, press
ModFreq
3) Set Wave and Parameter for Carrier Wave Signal
Press Wave key to enter the carrier wave interface and select sine wave to be the carrier wave (the default
is sine wave).
Press Freq soft key to set the frequency, use numerical keyboard to input 10 and then select the unit of
Instruments.uni-trend.com
ModWave
soft key and use numerical keyboard to input 2 and then select the unit of parameter to kHz.
soft key to select square wave to be the modulation wave, press
UTG1000X Series
29 / 74
Advertisement
Table of Contents
