UNI-T UTG1000X Series User Manual page 25

User's Manual
Press Freq key to set the frequency, use numerical keyboard to input 1 and then select the unit of
parameter to kHz;
Press Amp soft key to set the amplitude, use numerical keyboard to input 200 and then select the unit of
parameter to mVpp;
Press Duty soft key to set the duty cycle, use numerical keyboard to input 45 and then select the unit of
parameter to
As shown in the following figure.
4) Set Modulation Depth
After the parameter setting of the carrier wave is completed, press Mode
setting,
ModDepth
Press
to %.
Instruments.uni-trend.com
%.
soft key and use numerical keyboard to input 80 and then select the unit of
Shape AM to enter AM mode
 
parameter
UTG1000X Series
25 / 74