Index B400 Operating Instructions Manual page 104

Maintenance Summary - 8 Years
Seal the inner pane in the work area with sealant (s) again. After the assembly
of the panes and frame parts, the inner pane must be sealed using a sealant
(Terostat 930 gray is used at the factory). See Fig.:_06
8.
Example: G200.2 Work area door 03 1
Refit the front cover or front pane/design pane (a) and screw it on again on both
sides along the contour using the screws (M6 – 11 each).
100
Maintenance Instructions
B400 B500
DIE150EN - 15.08.2022