C080 - Check All Electrical Connections And Drive Belts Of The Drive Motors - Index B400 Operating Instructions Manual

C080 - Check all electrical connections and drive belts of the drive motors
Orientation
Requirement
Procedure
46
Carrying out the maintenance activities described below requires
special knowledge. For this reason, these maintenance activities
must only be carried out by staff that has received adequate training
by the machine manufacturer!
This activity is merely a test to check the power and encoder connections for proper
seating and tightness. Simultaneously, all drive belts are subjected to a visual
inspection.
Move the tool carriers to a suitable position.
It may also be necessary to remove various covers or plates for carrying out a visual
inspection. Furthermore, a special pair of pliers is needed for tightening the power
and encoder connections.
Example: Special pliers for tightening power and encoder connections on the motors
1. Loosen connector and check for corrosion and leaks.
2.
If traces of corrosion or moisture are visible, they must be
eliminated and their causes must be determined. If the
connectors cannot be cleaned, they must be replaced.
Maintenance Summary - 2.000 Operating hours
Maintenance Instructions
B400 B500
DIE150EN - 15.08.2022