Index B400 Operating Instructions Manual page 96

Requirement
92
General information. The values indicated in the table must be
strictly observed.
Example: Design pane specifications for the respective machines
A Machine designation
B Weight (kg)
C Values for centers of gravity
Y Y-value (mm)
X X-value (mm)
Turning length 1600 mm
*
1
Turning length 1400 mm
*
2
Turning length 2300 mm
*
3
From a weight of approx. 80kg, the use of lifting equipment (cranes,
forklifts or similar) is recommended. The machines marked with + in
the table ( example: design pane specifications ... ) have threaded
bushings at the top of the design pane and are therefore crane-
compatible.
If the design pane is not removed using a crane or other lifting equipment but by
hand using suction lifters, it is imperative that the current Load Handling
Ordinance (LasthandhabV) be taken into account. When using suction lifters (see
example), be sure to select the appropriate size or type according to the table
( example: design pane specifications... ).
The locally valid guide lines and regulations must be taken into
consideration.
Maintenance Summary - 8 Years
Maintenance Instructions
DIE150EN - 15.08.2022
B400 B500