D457 - Replacing Hydraulic Fluid - Index B400 Operating Instructions Manual

Maintenance Summary - 4.000 Operating hours
D457 - Replacing hydraulic fluid
Orientation
Requirement
Procedure
Maintenance Instructions
B400 B500
DIE150EN - 15.08.2022
Power off the machine and secure it against power on.
Use only approved hydraulic fluid. Details can be found in the
documentation and on the label of the hydraulic fluid tank.
When changing the type of hydraulic fluid, the unit must be flushed with new fluid.
For all work in connection with operating materials, the information in
the data sheets of the respective manufacturers and the information
in the document Notes on Operating Materials must be observed.
Specification and quantity of hydraulic fluid as specified in the
technical data.
Before replacing the hydraulic fluid, make sure that the required spare parts such as
seals and filters are available.
Use only the original filters according to the spare or wear parts list.
1. Suction off old fluid through the filler neck (a) or drain the fluid from the drain
plug (e). Use a suitable collection bin for this purpose.
2.
Use only lint-free cleaning cloths or a sponge!
75