Index B400 Operating Instructions Manual page 48

44
Example: Checking the obstacle detection
Check obstacle detection of the automatic work area door. During the obstacle
detection test, a rectangular strip or softwood squared lumber, for example, is
held in the travel path of the work area door during the closing process. If the
rectangular strip or squared timber comes into contact with the work area door
in the closing area, the obstacle detection is triggered and the closing
movement must be reversed.
If the obstacle detection does not immediately lead to reversal of the moving
direction, the complete work area door must be checked immediately. The
machine must not be operated any further.
8.
Be sure to contact the INDEX service department or an INDEX
representative.
Maintenance Summary - 2.000 Operating hours
Maintenance Instructions
B400 B500
DIE150EN - 15.08.2022